Doepfer

> that patch should work fine.
> if you want you can add a vca after the mixer and conrol
> it with the gate output or envelope output of the first a119.
> or you can add one of the vocoder patch suggestions from the
> same folder where you have uploaded the picture.
> 
> best wishes
> 
> ingo

...Thanks ingo,

...I have another question I noticed that Doepfer has a Frequency
Shifter (A-126), with which the component harmonics of a sound are
shifted not by an equal musical interval, but by the same frequency.

...I'm wondering if there is a simple way to apply transposition (in
which all of the components of an voice audio signal are raised or
lowered by an equal interval)...That way one could conceivably
transpose the audio signal  (up or down in frequency) coming from a
microphone before running the signal into the A-129/1 VOCODER ANALYSIS
SECTION then adjust each band filter coming from the A-129\1 by the
same amount in the opposite direction...

...If one were to continue this process, progressively transposing the
speech signal before the A-129/1 and adjusting each band from the
A-129/1 in the opposite direction in order to compensate, on two,
three or more A-129/1's then connecting each A-129/1 to a respective
A-129/2 and contemplating the patch for each with the same Voiced
Input and then combine all of the Vocoder Outputs together...They
could increase the resolution of the vocoder (the amount of band
filters) to what ever number they desired.

...am I wrong?