Doepfer

Uuuups...

We will have to correct the manual and website. Please tell me where you
found the wrong 5V spec. Thank you.

Best wishes
Dieter Doepfer



  -----Ursprüngliche Nachricht-----
  Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]Im
Auftrag von Keld Sørensen
  Gesendet: Freitag, 9. November 2007 08:26
  An: Doepfer_a100@yahoogroups.com
  Betreff: [Doepfer_a100] Re: Clock divider/sequencer w/ >10V clock signals?


  Yeah - the manual is wrong. Try a search in the archives for:
  A-161clock sequencer.

  Keld

  --- In Doepfer_a100@yahoogroups.com, "theglyph2000" <theglyph@...>
  wrote:
  >
  > Both my clock divider and sequencer are generating >10V clock
  signals. Based on
  > Doepfer's page it should be roughly 5V, correct? 10V seems too
  close to the rails.
  >
  > The clock will trigger the gates on my Moog Voyager but I need to
  attenuate the
  > signals when using them with my MPC's footswitch inputs (which
  trigger on the clocks
  > falling edge?).
  >
  > Any suggestions on what may be going on here?
  >
  > Thanks,
  > theglyph
  >



  


[Non-text portions of this message have been removed]