Doepfer

Hi Dieter.
Thanks, as always, for the quick response. It´s page 8 in the A-161
manual. You can see a JPG of the page with the paragraph in a red
box in my photo album. (It´s Studio1dk: doepfer A161)

Keld


--- In Doepfer_a100@yahoogroups.com, <hardware@...> wrote:
>
> Uuuups...
> 
> We will have to correct the manual and website. Please tell me 
where you
> found the wrong 5V spec. Thank you.
> 
> Best wishes
> Dieter Doepfer
> 
> 
> 
>   -----Ursprüngliche Nachricht-----
>   Von: Doepfer_a100@yahoogroups.com 
[mailto:Doepfer_a100@yahoogroups.com]Im
> Auftrag von Keld Sørensen
>   Gesendet: Freitag, 9. November 2007 08:26
>   An: Doepfer_a100@yahoogroups.com
>   Betreff: [Doepfer_a100] Re: Clock divider/sequencer w/ >10V 
clock signals?
> 
> 
>   Yeah - the manual is wrong. Try a search in the archives for:
>   A-161clock sequencer.
> 
>   Keld
> 
>   --- In Doepfer_a100@yahoogroups.com, "theglyph2000" <theglyph@>
>   wrote:
>   >
>   > Both my clock divider and sequencer are generating >10V clock
>   signals. Based on
>   > Doepfer's page it should be roughly 5V, correct? 10V seems too
>   close to the rails.
>   >
>   > The clock will trigger the gates on my Moog Voyager but I need 
to
>   attenuate the
>   > signals when using them with my MPC's footswitch inputs (which
>   trigger on the clocks
>   > falling edge?).
>   >
>   > Any suggestions on what may be going on here?
>   >
>   > Thanks,
>   > theglyph
>   >
> 
> 
> 
>   
> 
> 
> [Non-text portions of this message have been removed]
>