Doepfer

--- In Doepfer_a100@yahoogroups.com, <hardware@...> wrote:
Yes, thanks Dieter.  Now I can breath!

The next question is what module should I buy next;)

Cheers,
theglyph


> Thank you. We will correct it immediately.
> 
> Best wishes
> Dieter Doepfer
> 
> > -----Ursprüngliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com
> > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Keld Sørensen
> > Gesendet: Freitag, 9. November 2007 12:47
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: [Doepfer_a100] Re: Clock divider/sequencer w/ >10V clock
> > signals?
> >
> >
> > Hi Dieter.
> > Thanks, as always, for the quick response. It´s page 8 in the A-161
> > manual. You can see a JPG of the page with the paragraph in a red
> > box in my photo album. (It´s Studio1dk: doepfer A161)
> >
> > Keld
> >
> > --- In Doepfer_a100@yahoogroups.com, <hardware@> wrote:
> > >
> > > Uuuups...
> > >
> > > We will have to correct the manual and website. Please tell me
> > where you
> > > found the wrong 5V spec. Thank you.
> > >
> > > Best wishes
> > > Dieter Doepfer
> > >
> > >
> > >
> > > -----Ursprüngliche Nachricht-----
> > > Von: Doepfer_a100@yahoogroups.com
> > [mailto:Doepfer_a100@yahoogroups.com]Im
> > > Auftrag von Keld Sørensen
> > > Gesendet: Freitag, 9. November 2007 08:26
> > > An: Doepfer_a100@yahoogroups.com
> > > Betreff: [Doepfer_a100] Re: Clock divider/sequencer w/ >10V
> > clock signals?
> > >
> > >
> > > Yeah - the manual is wrong. Try a search in the archives for:
> > > A-161clock sequencer.
> > >
> > > Keld
> > >
> > > --- In Doepfer_a100@yahoogroups.com, "theglyph2000" <theglyph@>
> > > wrote:
> > > >
> > > > Both my clock divider and sequencer are generating >10V clock
> > > signals. Based on
> > > > Doepfer's page it should be roughly 5V, correct? 10V seems too
> > > close to the rails.
> > > >
> > > > The clock will trigger the gates on my Moog Voyager but I need
> > to
> > > attenuate the
> > > > signals when using them with my MPC's footswitch inputs (which
> > > trigger on the clocks
> > > > falling edge?).
> > > >
> > > > Any suggestions on what may be going on here?
> > > >
> > > > Thanks,
> > > > theglyph
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
>