Doepfer

Thank you. We will correct it immediately.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Keld Sørensen
> Gesendet: Freitag, 9. November 2007 12:47
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Re: Clock divider/sequencer w/ >10V clock
> signals?
>
>
> Hi Dieter.
> Thanks, as always, for the quick response. It´s page 8 in the A-161
> manual. You can see a JPG of the page with the paragraph in a red
> box in my photo album. (It´s Studio1dk: doepfer A161)
>
> Keld
>
> --- In Doepfer_a100@yahoogroups.com, <hardware@...> wrote:
> >
> > Uuuups...
> >
> > We will have to correct the manual and website. Please tell me
> where you
> > found the wrong 5V spec. Thank you.
> >
> > Best wishes
> > Dieter Doepfer
> >
> >
> >
> > -----Ursprüngliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im
> > Auftrag von Keld Sørensen
> > Gesendet: Freitag, 9. November 2007 08:26
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: [Doepfer_a100] Re: Clock divider/sequencer w/ >10V
> clock signals?
> >
> >
> > Yeah - the manual is wrong. Try a search in the archives for:
> > A-161clock sequencer.
> >
> > Keld
> >
> > --- In Doepfer_a100@yahoogroups.com, "theglyph2000" <theglyph@>
> > wrote:
> > >
> > > Both my clock divider and sequencer are generating >10V clock
> > signals. Based on
> > > Doepfer's page it should be roughly 5V, correct? 10V seems too
> > close to the rails.
> > >
> > > The clock will trigger the gates on my Moog Voyager but I need
> to
> > attenuate the
> > > signals when using them with my MPC's footswitch inputs (which
> > trigger on the clocks
> > > falling edge?).
> > >
> > > Any suggestions on what may be going on here?
> > >
> > > Thanks,
> > > theglyph
> > >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>