Doepfer

> Hi,
>
> my quantizers are out of tune with each other and with my MIDI-CV
> Converter. The converter tracks exactly 1V/Oct but I can't get the
> Quantizers to read 0V when playing the lowest note. You have told me
> already how to adjust the scale on this forum, but after further
> investigation, I now need to adjust the offset, too. I have tried
> adjusting each of the other three trims in turn, but to no avail. The
> first quantizer reads -7.4 mV on the lowest key.
>
> Yours Aye
>
> Stuadh

The quantizer has no offset adjustment. An offset of 7mV is less than 1/10
semitone and could be compensated if necessary very easily by the (fine)
tune control of the VCO controlled by the A-156. If you need an offset of
less than 7mV a trimming potentiometer and resistor has to be added. But so
far (the A-156 is available since 1998) nobody complained the offset.

Best wishes
Dieter Doepfer