Doepfer

many thanks, dieter. so this is how a pitch to cv converter works?
fortunately i have both modules here, so i can report that it was very
successful, although i have yet to do the fine tuning necessary for a
linear relationship between the tempos - but then the non-linearities
are wicked too, as so often with all this modular stuff :)

and any patch with a ripple parameter must be good!

thanks again,

stu

--- In Doepfer_a100@yahoogroups.com, <hardware@...> wrote:
>
> > hi group,
> >
> > i'm looking to controlling the delay time of an a188 bbd according
to
> > the tempo of the piece being played (which is not set by the a100
> > itself). is there a way to convert, say, pulses from the a190 clock
> > output to a cv ? a kind of very lf to cv converter, i supppose is
what
> > i mean.
> >
> > or, come to that, can someone suggest a better/different approach?
> >
> > cheers,
> >
> > stu
>
> From the theory a low pass filtered pulse with constant pulse width
should
> do that job, e.g. an A-162 trigger delay (delay time = minimum, lenght
= ?)
> followed by an A-170 slew limiter should work. You will have to try
the gate
> length and slew limiter setting to obtain the desired CV. The A-162
length
> should be a bit shorter than the shortest period of the clock signal
> (tempo). The slew limiter setting defines the ripple of the CV.
>
> Best wishes
> Dieter Doepfer
>




[Non-text portions of this message have been removed]