Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: [Doepfer_a100] Re: 5V Low-Cost Adapter questions

2007-12-14 by Florian Anwander

Hi

one could add a larger cooling device to the regulator, but I assume 
this would cause mechanical problem in transport (too much mass).

Florian

selfoscillate wrote:
> hello chuck,
> 
> only one ad5 is allowed per row.
> as long as the total 5 volts consumption of the modules
> doesn't exceed 100ma you can use more than 1 module
> with the ad5. in the example below (a113 and a190)
> the 5 volts consumption is 150 ma, therefore you need
> two ad5.
> 
> best wishes
> 
> ingo
> 
> 
> 
> --- In Doepfer_a100@yahoogroups.com, "charles graef" 
> <vogelscheiss@...> wrote:
> 
>>Sorry, I'm confused -- you're saying that the A-100AD5 will only 
> 
> permit one
> 
>>5V module in the row in which it's installed?
>>
>>--Chuck
>>
>>-----Original Message-----
>>From: Doepfer_a100@yahoogroups.com 
> 
> [mailto:Doepfer_a100@yahoogroups.com] On
> 
>>Behalf Of hardware@...
>>Sent: Friday, December 14, 2007 10:12 AM
>>To: Doepfer_a100@yahoogroups.com
>>Subject: AW: [Doepfer_a100] 5V Low-Cost Adapter questions
>>
>>
>>>I have two 5V Low-Cost Adapters (A-100AD5). I have previously 
> 
> used them
> 
>>>with A-113 and A-190 installed in separate A-100G6 cabinets.
>>>
>>>Now I am going to put A-113 and A-190 into same cabinet. Looking 
> 
> at the
> 
>>>power consumption figures it appears, that two A-100AD5 are still
>>>needed. Just to make to make sure, I would like to ask, how 
> 
> should the
> 
>>>A-100AD5:s be installed, when
>>>- A-113 and A-190 are in the same row/power rail.
>>
>>Sorry, that's not possible as only one A-100AD5 is allowed for each 
> 
> bus
> 
>>board.
>>
>>
>>>- A-113 and A-190 are in different rows.
>>
>>That's the right solution. Simple connect one A-100AD5 on each bus 
> 
> board.
> 
>>Best wishes
>>Dieter Doepfer
>>
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
> 

-- 
Florian Anwander                  |ConSol
Tel.   +49(89)45841-133           |Consulting&Solutions Software GmbH
Fax    +49(89)45841-111           |Franziskanerstr. 38, D-81669 München
email: florian.anwander@consol.de |http://www.consol.de

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.