Doepfer

The main differences I've found between ring modulators is weather  
they are AC coupled or not and how much bleed-through you get from the  
program and modulator inputs. The Synthi ring was AC coupled, meaning  
when used as a VCA (a DC voltage for the modulator) the Signal would  
appear only when the DC was "moving". So a gat inputted there would  
make a sound on the rising and falling edges and not when held. These  
are the most common ring modulators. The first one I ever used was the  
one on a ARP 2500 and if I remember correctly (it was +30 years ago!)  
it was combined with a VCA. The circuit is quite simple and that's why  
you often see dual versions. As to the bleed-through - I guess you  
have to have first hand experience with the unit. Technically when  
putting in two sine waves A & B into the unit all you should here on  
the output is two tones a+b and a-b. If you hear the originals, that  
is the bleed-through. Usually this is at a very low level and not too  
much a problem but if you are using it as a pitch doubler (both a and  
b the same pitch) then it can get in the way. I would imagine that RMs  
in the same price range are very much alike. It cost to make a good  
one. To emulate the RM in the Synthi almost any will do - it was not  
the best RM out there for sure - mine had lots of bleed-through though  
some of that could be blamed on the matrix I'm sure. The Plan-B Model  
25 looks very nice. It is a combo unit with a VCA and etc - much like  
the ARP 2500's unit. and the ring is DC coupled. I have not hear this  
unit but the spec say 65cB of carrier suppression which is very good.

-James


On Feb 10, 2008, at 5:09 AM, johnppp2 wrote:

> I'm still searching on my basic building blocks, anyone point me
> towards the fave Ring Mod? I'm still on my EMS style way of thinking
> but if there's more versatile ones out there i'd like to know about  
> them.
>
>
>
>
> Yahoo! Groups Links
>
>
>