Doepfer

> Thanks Dieter - both mine must be first generation units. Are the
> units outer dimensions changed? If I set them next to mine would they
> be smaller? No problem there, just curious since I will be buying a
> third case soon. I guess the only difference would be the lids would
> be different from each other, something easily dealt with.
> -Jh

It's a long time ago that we manufactured the suitcase version with 85 HP.
From the theory the new version should be ~5 mm less.

The reason for the 85 HP was that in the standard frames rails with 85 HP
are used but on each side 1/2 HP is covered by the mouting angle which
results in 84 HP useable width. When we started the suitcases we used the
same 85 HP rails to ease the stock holding. And for these suitcases the
additional 1 HP blind panel was required. In the meantime the frames (both
the standard cases and the suitcases) are manufactured by an external
company and they shorten the rails for the suitcases to the required 84 HP.

Best wishes
Dieter Doepfer