Doepfer

There is a midi learning procedure.  Check the manual on the Doepfer website.  It seemed complicated to me at first, but now after doing it a few times it is easy.  Your keyboard probably isn't transmitting on the midi channel the A-190 is set to.
   
  This brings up a minor A-190 problem I am having.  Mine doesn't seem to hold the midi channel.  It will change when powered off.  I haven't tested enough to figure out if it is every time it is powered off or if it always reverts to the same channel.  I just switch to the midi learning mode and it picks up the channel and works fine. 
   
  Ross

macko <wolas2@wp.pl> wrote:
  hello

i've just installed my new a190, but, unfortunately, i have some 
problems..
i've connected a keyboard to a190, but there is no response. it is 
written in the manual that gate and pitch are pre-installed on the bus, 
but pushing keys effects with nothing. no LEDs response. only when i 
switch my modular on clock and gate LEDs pulse. when pushing keyboard - 
nothing.
am i doing something wrong? maybe there is a calibration or midi 
learning procedure?
i'd appreciate any help.

best regards,
maciej

----------------------------------------------------
Lansujesz i baunsujesz czy grindujesz i trickujesz?
Extrema.wp.pl - ostra jazda, ZERO ¦CIEMY!
sprawd¼ sam: http://klik.wp.pl/?adr=http%3A%2F%2Fcorto.www.wp.pl%2Fas%2FextremaP.html&sid=452



------------------------------------

Yahoo! Groups Links






[Non-text portions of this message have been removed]