Doepfer

the wave multiplier works fine. but it is before the bbd in the power
line so yeah might be sucking it up somehow. more tonight when I test
the bbd on its own.


anyone else has a bbd with any other module combination in their mini
case?

--- In Doepfer_a100@yahoogroups.com, Anthony Rolando <goldenechos@...>
wrote:
>
> 
> Carlos, does the other module (wave mult)  work properly when placed
in the rack? Perhaps that module is  damaged and overdrawing the mini
case supply causing the BBD not not function.
> 
> Tony
> 
> > To: Doepfer_a100@yahoogroups.com
> > From: bushwick@...
> > Date: Tue, 19 Aug 2008 19:08:22 +0000
> > Subject: [Doepfer_a100] Re: bbd and mini case problem - won't work?
> > 
> > Can't think what else it could be. like I said works perfectly when I
> > put it back into the rack.
> > 
> > going to try the bbd on its own in the mini case later tonight see if
> > it works properly, if it does then it will be safe to say than either
> > the mini case current rating or some of the modules rating is wrong.
> > if it doesn't then there might be something else that prevents the bbd
> > module from working in the mini-case...
> > 
> > C.
> > 
> > --- In Doepfer_a100@yahoogroups.com, achtung_999
> > <heinrich.himmelwasser@> wrote:
> > >
> > > Hello Carlos,
> > > I don't think the current can be the problem.
> > > The 188-1 (4096) takes 80mA and the A137 takes 40mA.
> > > That is 120 mA, well within the range of 200mA that the minicase
> > powersupply
> > > delivers...
> > > 
> > > greetz,
> > > 
> > > Ernst
> > > 
> > > 
> > > 
> > > 
> > > 
> > > On Tue, Aug 19, 2008 at 2:41 AM, Carlos <bushwick@> wrote:
> > > 
> > > >
> > > > I have a bbd module ( 4096 stages) I tried putting it in a mini
> > > > case(beauty case) witha wave multiplier as they fit perfectly
> > > > together in there but it doesn't seem to work correctly.
> > > >
> > > > Basically the clock is not working and it seems to be stuck at a
> > > > really long delay, and can only get noise out of it instead of the
> > > > usual thick delay (but can still mix with initial signal)
> > > >
> > > > I put it back on my rack and it went to working perfectly.
> > > >
> > > > is there a reason/limitation for this module that won't allow
it to
> > > > work well in the mini case?
> > > >
> > > > or is it simply that when those two modules are together they
suck way
> > > > too much current for the mini case supply?
> > > >
> > > > C.
> > > >
> > > >  
> > > >
> > > 
> > > 
> > > [Non-text portions of this message have been removed]
> > >
> > 
> > 
> > 
> > ------------------------------------
> > 
> > Yahoo! Groups Links
> > 
> > 
> > 
> 
> _________________________________________________________________
> Be the filmmaker you always wanted to be—learn how to burn a DVD
with Windows®.
> http://clk.atdmt.com/MRT/go/108588797/direct/01/
> 
> [Non-text portions of this message have been removed]
>