Doepfer

Hi Carlos,
The LFO speed is controlled by three pairs of capacitors, one pair for 
each 'range' switch position:

C1A/C2A = 2n2
C1B/C2B = 47n
C1C/C2C = 680n (= 0.68u)

The biggest cap values give the lowest speed. Thus to slow the LFO 
down, replace a pair of these caps with something bigger (or you could 
simply solder a cap in parallel with each of the chosen pair) - 
doubling the cap value will halve the speed. These caps are either side 
of the top-most TL084, though the silkscreen printing is partially 
obscured by other components.

Tim

--- In Doepfer_a100@yahoogroups.com, "Carlos" <bushwick@...> wrote:
>
> 
> I was wondering if there was a way to lower the range on it. I really
> like this module and the ability to use it as an oscillator but most
> of the time I use it to modulate things at different phases, and would
> be really great if it went lower in range for slower sweeps
> 
> Dieter is there a way to trim the range down? I don't mind loosing
> some of the higher part of the range
> 
> thanks
> Carlos
>