Doepfer

Hi Carlos,
Just another take on your problem:
I am currently building a small external box containing a 9volt battery to
replace the A176 in my portable setup.
The costs for this are less than �25 euros.
I can imagine some person that is a more seasoned electronics person than me
also including a voltage inverter in this design.

greetings,

Ernst







On Sun, Oct 5, 2008 at 10:31 PM, Tim Stinchcombe <
timothy@tstinchcombe.freeserve.co.uk> wrote:

>   Hi Carlos,
> The LFO speed is controlled by three pairs of capacitors, one pair for
> each 'range' switch position:
>
> C1A/C2A = 2n2
> C1B/C2B = 47n
> C1C/C2C = 680n (= 0.68u)
>
> The biggest cap values give the lowest speed. Thus to slow the LFO
> down, replace a pair of these caps with something bigger (or you could
> simply solder a cap in parallel with each of the chosen pair) -
> doubling the cap value will halve the speed. These caps are either side
> of the top-most TL084, though the silkscreen printing is partially
> obscured by other components.
>
> Tim
>
>
> --- In Doepfer_a100@yahoogroups.com <Doepfer_a100%40yahoogroups.com>,
> "Carlos" <bushwick@...> wrote:
> >
> >
> > I was wondering if there was a way to lower the range on it. I really
> > like this module and the ability to use it as an oscillator but most
> > of the time I use it to modulate things at different phases, and would
> > be really great if it went lower in range for slower sweeps
> >
> > Dieter is there a way to trim the range down? I don't mind loosing
> > some of the higher part of the range
> >
> > thanks
> > Carlos
> >
>
>  
>


[Non-text portions of this message have been removed]