Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von madrayken
> Gesendet: Dienstag, 28. Oktober 2008 18:31
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Gates
>
>
> So, any suggestion on how to create a gate signal from an envelope for
> use by the sample and hold? So far, I can send gates from my A-190 and
> from my LFO. However, if I try using one of my envelopes as a gate
> signal, I get nothing. Do I need to drop the voltage or something so
> that it goes into the negative?
>
> I'm sure I'm missing something basic.

An envelope signal is not a gate signal but an analog control voltage. If
you don't want to use the gate signal that is used to trigger the envelope
(e.g. by means of a multiple) you may use the A-167 Analog Comparator to
derive a gate signal from the envelope. The quad ADSR A-143-2 has already
several gate ouputs available: End of Attack (EOA), End of Decay (EOD) and
End of Release (EOR).

Best wishes
Dieter Doepfer