I hate to break it to you, but there is nothing terribly different, complex or expensive about the SINE circuit in the schematic linked below. Pretty common stuff. TOny > To: Doepfer_a100@yahoogroups.com > From: caymus91@mac.com > Date: Sat, 29 Nov 2008 18:18:24 +0000 > Subject: [Doepfer_a100] Re: starting a modular - Z3000 waveform quality? > > Actually the high-quality sine circuit is *quite* common. According to my schematic > library, most vintage oscillators used this standard design. For example, my Aries VCOs > produce a pretty good purity sine using this: > > http://www.leinermedia.net/aries/AriesSchematics/AR-317s.gif > > My guess is modern VCO designs use the cheap low-quality diode circuit instead because: > > A - the simple diode circuit requires no calibration where the Hi-Q one has two trim pots > to set (symmetry and purity). > > B - According to this thread it appears many analog users are unaware or inexperienced > with quality VCO sines. So there no customer demand. > > BTW, nobody is advocating "pure" sines - just ones with no audible harmonic distortion. > That's certainly is easy to design in analog. > > > > > --- In Doepfer_a100@yahoogroups.com, Florian Anwander <fanwander@...> wrote: > > > > Hi laryn91 > > > > > I don't get it either. All I asked is if anyone knows of any euro VCO that can produce a > sine > > > wave without audible harmonic distortion (Plan-B and ZO so far). To me this a very > useful > > > feature. > > I don't know that there would exist any schematic for this. I never have > > seen a schematic for a pure sine oscillator that is V/Oct voltage > > controlled. I may be wrong, but I think it is not really possible. > > > > Florian > > > > > ------------------------------------ > > Yahoo! Groups Links > > > _________________________________________________________________ Proud to be a PC? Show the world. Download the �I�m a PC� Messenger themepack now. hthttp://clk.atdmt.com/MRT/go/119642558/direct/01/ [Non-text portions of this message have been removed]
Message
RE: [Doepfer_a100] Re: starting a modular - Z3000 waveform quality?
2008-11-29 by Anthony Rolando
Attachments
- No local attachments were found for this message.