Doepfer

Ahh, found your picture Kevin, it was on the las page of course. It helps,
but on the yellow cable it seems that it is just connected to the case, is
it so? Is it just a screw in the case. Then the yellow disappears below on
your picture... where does the final lead end up?


----- Original Message -----
From: "code_pig" <code_pig@yahoo.com>
To: <Doepfer_a100@yahoogroups.com>
Sent: Monday, June 17, 2002 5:35 PM
Subject: [Doepfer_a100] Re: Help guys=)


> I don't know if it's any help, but I unloaded a photo to the gallery
> of the power supply of a G6 I got about 6 weeks ago.  It's isn't the
> best photo, but I think you can see how it is wired.
>
> Regards,
> Kevin
>
> --- In Doepfer_a100@y..., "Andreas Lindholm"
> <andreas.k.lindholm@t...> wrote:
> > I bought a new power supply and power switch from doepfer to plug
> in a few
> > extra modules that need extra juice. I figured it would be the same
> as in my
> > old doepfer rack but, no, they have changer power supply, can
> anyboy please
> > look at yours if you have a new one and inform me what wire goes
> where from
> > the on/off button to the powersupply since I just can't copy the
> old layout
> > which hade just one row of three connectors, one blue, one green
> and one
> > brown. Now I have one blue, one green and one black and a power
> supply with
> > two rows of of two pairs of connectors. The green cable is also
> split in
> > two, one connector and one ring.
> >
> > A little help would be appreciated.
>
>
>
> To unsubscribe from this group, send an email to:
> doepfer_a100-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>