Doepfer

What you are describing is great, and would constitute an ASR, but it
doesn't match the factory description:

"The signal at the common T&H input is connected to the addressed T&H
output. As soon as a new output is addressed the last voltage is
stored at the output (Track&Hold function)." 


--- In Doepfer_a100@yahoogroups.com, Axel Jungkunst <phaedra@...> wrote:
>
> Now I see the error in your explanation: the incoming voltage is not 
> distributed to all
> 8 S/H outputs, but to the first one. Each incoming pulse shifts it one 
> S/H-Output further
> and fills the first one with the new state.
> You can terminate the number of outputs by using a digital out to the 
> reset in (look at the example).
> Try it out, I've done it, it works fine.
> best regards
> Axel
>