Doepfer

aesoteric@talk21.com wrote:
> Hi Dieter,
> 
> The four screws in the rear side of the suitcase are inplace, and are
> attached to the standoffs inside the case - however, I think the
> screws attaching the heat sink to the PCB and into the standoffs have
> snapped (If I understand how it should be correctly) 
NO NO NO NO NO NO. Everything is ok with your case.

Please reattach the original Doepfer spring and check whether the 
distortion still occurs. If it does NOT occur, then you know the fault 
is the new spring. If it DOES still distort withthe original spring, 
then send the module back to Thomann with the original spring.

Florian