Doepfer

It's a pre-amp. So yes, it does gain.But it is doing a lot more! It's also
an envelope follower and a gate/trigger generator.

Be careful though it can also distort your signal like crazy, if you are not
careful.

In the video I posted earlier I use it to amplify the output of the A128
fixed filter bank, which tends to be fairly soft mostly.

Greetings,

Ernst





On Tue, Jan 27, 2009 at 2:33 AM, Doug <dougc356@yahoo.com> wrote:

>   The A-119 does gain you mean? Okay, so now I'm going to get picky.
> Do I have to spend 8HP to get a single channel of audio gain?
>
> Maybe this is the DIY project I've been longing for ;)
>
> --- In Doepfer_a100@yahoogroups.com <Doepfer_a100%40yahoogroups.com>,
> achtung_999
> <heinrich.himmelwasser@...> wrote:
> >
> > The A119 does it perfectly well.
> >
> >
> > On Mon, Jan 26, 2009 at 10:46 PM, Doug <dougc356@...> wrote:
> >
> > > Hi folks, is the A-183-2 (http://www.doepfer.de/a1832.htm) for
> real? I
> > > want four! This is exactly what I am after. Especially this part:
> > >
> > > "The amplification range for the input will be probably 0...+2
> in the
> > > attenuator mode, and -2...+2 in the polarizer mode, i.e. the
> maximum
> > > amplification will be x2 and the module can be used also to
> amplify CV
> > > or audio signals (for other amplifications only the value of a
> > > resistor has to be changed)."
> > >
> > > Oh, and being able to amplify audio through this thing would be
> > > useful. Perhaps all you experts can tell me there is an
> alternative
> > > out there already. I'm surprised I can't simply amplify audio
> (gain >
> > > 1). I must be doing it wrong.
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>  
>


[Non-text portions of this message have been removed]