Doepfer

My simple advice is to get a multimeter and learn how to use it. Check 
for shorts between your power rails, and maybe take your problem A-190 
and the 5V regulator out of the case and check for shorts between the 
power pins there as well. If all this is too much to figure out on your 
own, then take it to an electronics specialist and let them do it for 
you. Of course, if it's still under warranty you could send it all in 
for service.

Best!
D.

madrayken wrote:
> After the Monday-of-doom, I replaced my fuse, plugged in my modules.
> They seem to work... with one exception.
> 
> 
> When I plugged in the A-190, my two oscillators produced nothing but
> weird, very low-level ring-mod-y noise. 
> 
> I tried plugging in the A-190, *without* the AD5 - same problem. 
> I tried plugging in the AD5 alone - no problem.
> 
> 
> 1) Has anyone had an A-190 cause this?
> 2) Could it be a problem with the AD5 instead?
> 3) Could it be some weird short on the +5v part of the rail instead?
> 
> I've no idea what to replace, or whether to look elsewhere in the box
> for some other cause.
> 
> Any help - as ever - much appreciated.
> 
> Dene
> 
> P.S. I also found I started getting slight shocks from the case after
> use... :-( makes me very nervous.


-- 
derek holzer ::: http://www.umatic.nl ::: http://blog.myspace.com/macumbista
---Oblique Strategy # 132:
'Remember .those quiet evenings'