Doepfer

Well I have a breadboard yes, but I'd have to get my head around this first heheh... Thank you very very much for providing this!

Niels


--- In Doepfer_a100@yahoogroups.com, Florian Anwander <fanwander@...> wrote:
>
> Hello Niels
> 
> > I think I will try my hand on DIYing a latching manual gate.
> 
> If you are able to build circuits on breadboard pcbs then my sync2clock 
> converter provides most parts required for that:
> 
> http://fa.utfs.org/diy/a100/sync2clock/index.html
> http://fa.utfs.org/diy/a100/sync2clock/din2clock.png
> 
> You need the part around the Q1, IC1, Q6 completely and IC2B. Either you 
> replace it by an NAND or you use the unused gate D of IC1 as inverter 
> for the signal. You may change C1 to 10nF to have a shorter pulse (= 
> less delay).
> 
> Florian
>