Doepfer

You were going to write "subtractive" synth signal path - right?

Keld

--- In Doepfer_a100@yahoogroups.com, "Guy Drieghe D." <guy@...> wrote:
>
> 
> An excellent basic setup, Greg -- a "regular" additive synth signal  
> path.
> It's good that you've opted for voltage controlled EG and LFO; gives  
> you a bit more to play with.
> 
> The 606 outputs +14V triggers, isn't it ?
> Although I think it wouldn't hurt connecting this to the A-141 gate  
> input, it might be too high for the A-100 system -- better check with  
> Dieter first.
> 
> 
> Have fun !
> 
> _Guy
> 
> 
> 
> On 22 Apr 2009, at 06:02, gregory cerveny wrote:
> > I've been picking up modules here and there (some of them from this  
> > board) to build my first modular system. I don't really know what  
> > I'm doing, but I've been reading through the manufacturer  
> > descriptions as I scope out pieces.
> >
> > Right now I have collected:
> > a111 VCO
> > a120 VCF
> > a131 VCA
> > a141 VCASDR
> > a147 VCLFO
> >
> > I think this is enough for the unit to make noise. Provided, of  
> > course, that I pick up a case/power and patch cable set.
> >
> > I am also wondering if I can use the gate triggers off my tr-606 to  
> > sequence monotone patterns on this setup.
> >
> > Advice on anything I might be missing or using the tr-606 would be  
> > appreciated.
> >
> > Thanks!
> > Greg
> >
>