Doepfer

I did this to a AS joystick I have. I'm not sure what the Doepfer  
looks like inside but all I did to the AS one was to invert the cables  
running from the lug on the joystick pot to the PCB. now the right is  
left and the up is down. I don't know if the Doepfer joystick is PCB  
mounted or not but even if it is I'm sure there is a resistor you can  
disconnect  or a trace you can cut and do the same thing. I have two  
used AS joysticks and one apparently was made for mounting in the  
French Connection keyboard because it's orientation is reverse from  
the other (and all the other pictures except the FC's on their  
website). I also use my portable cabinets in the flat position and  
having the cables at the top make all the difference. I imagine all  
monster case users think about this too.

-James

On May 7, 2009, at 1:26 PM, mirror_saw7778 wrote:

>
>
> I have a A174, and am considering buying a second. In order to use  
> multiple A174 in a table top configuration as I desire I want to  
> invert the module physically, so the joystick is at the bottom, or  
> front. this way I don't have to reach over the cables when I have  
> the module placed horizontally in a table top case.
>
> I tried simply rotating the joystick, but the potentiometers stuck  
> out the side of the module so much a blanking panel would be needed.
>
> Is there a way to invert the voltage of the axis in the A174? I  
> notice there appears to be some pins where jumpers could go on the  
> PCB. What are they for? If not that, could I just reverse the wiring  
> on the joystick pots (meaning the ribbon that connects the joystick  
> to the PCB)?
>
> - I would consider the FoH Choices, but the front panel design makes  
> my eyes bleed :)
>
> thanks!
>
>
> 



[Non-text portions of this message have been removed]