Doepfer

Please look at our FAQ page:

www.doepfer.com > FAQ > R2M/A-198 > How can I distinguish between the old
and new version of the manual ?

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Richard Scott
> Gesendet: Samstag, 16. Mai 2009 02:56
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] A-198 question
>
>
> the description of this modules mentioned old and new versions? But is
> there any way to physically/visually distinguish these? For the older
> version it says:
>
> "the pressure sensor is made with conductive rubber located below the
> position sensor and works not as accurate as the very precise position
> sensor. The resistance of the conductive rubber changes with varying
> pressure and causes a variable voltage. But the coherence between
> pressure and resistance/voltage is not very accurate - except that an
> increasing pressure will cause an increasing voltage. Even some
> difference of the pressure sensor behaviour over the length of the
> manual may be possible as the conductive rubber has tolerances over this
> length."
>
> Richard
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>