Doepfer

thanks, can anyone who has used both tell me how extreme the difference 
is between the older and newer A-198? - it sounds from the description 
as if the pressure sensor older one is not really easily playable?

Richard



yahoo@doepfer.de wrote:
> 
> 
> 
> Please look at our FAQ page:
> 
> www.doepfer.com > FAQ > R2M/A-198 > How can I distinguish between the old
> and new version of the manual ?
> 
> Best wishes
> Dieter Doepfer
> 
>  > -----Ursprüngliche Nachricht-----
>  > Von: Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100%40yahoogroups.com>
>  > [mailto:Doepfer_a100@yahoogroups.com 
> <mailto:Doepfer_a100%40yahoogroups.com>]Im Auftrag von Richard Scott
>  > Gesendet: Samstag, 16. Mai 2009 02:56
>  > An: Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100%40yahoogroups.com>
>  > Betreff: [Doepfer_a100] A-198 question
>  >
>  >
>  > the description of this modules mentioned old and new versions? But is
>  > there any way to physically/visually distinguish these? For the older
>  > version it says:
>  >
>  > "the pressure sensor is made with conductive rubber located below the
>  > position sensor and works not as accurate as the very precise position
>  > sensor. The resistance of the conductive rubber changes with varying
>  > pressure and causes a variable voltage. But the coherence between
>  > pressure and resistance/voltage is not very accurate - except that an
>  > increasing pressure will cause an increasing voltage. Even some
>  > difference of the pressure sensor behaviour over the length of the
>  > manual may be possible as the conductive rubber has tolerances over this
>  > length."
>  >
>  > Richard
>  >
>  >
>  > ------------------------------------
>  >
>  > Yahoo! Groups Links
>  >
>  >
>  >
> 
>