Hi Dieter. I see that the conversion from 230 VAC to 120 VAC is just a matter of changing the power supplies pc board solder connections which is easy for me to do based on the tutorial below on your website's FAQ A100 section. Festlegen der Netzspannung bei A-100 PSU2 Setting the mains voltage for A-100 PSU2 Thank you so much for replying to my message. I'm very satisfied with G3 & G6 frame sytems. I'll be using G6 system tonight in a live performance duet with Dave Vosh here in Maryland "09/17/2009 - Dave Vosh (SAFE 2) & Logan Mitchell Sr (Synth Tech Project) aka The Mitchell / Vosh Duo, "LIVE" at the "District Of Noise"/Sonic Circuits CD release event. Doors open up at 7:30pm, Start time is 8:30pm & the Entrance Fee is $7.00. Location - PYRAMID ATLANTIC 8230 Georgia Avenue, Silver Spring MD 20910 301-608-9101, located three blocks south of the Silver Spring metro station (red line), Free parking in gated lot out front, INFO: www.dc-soniccircuits.org, DIRECTIONS: www.pyramidatlanticartcenter.org. See the official event poster on FLICKR at http://www.flickr.com/photos/intangible/3874185607/sizes/l/." Logan Mitchell Sr (Synth Tech Project) http://sites.google.com/site/synthtechproject To: Doepfer_a100@yahoogroups.com From: yahoo@doepfer.de Date: Thu, 17 Sep 2009 09:37:16 +0200 Subject: AW: [Doepfer_a100] Technical questions about the A-100PSU2 Power Supply > Hello. I live here in the U.S. & may be purchasing a G6 frame > case from someone in the U.K. Can its A-100PSU2 230volts ac/50 Hz > power supply be rewired to work at 120 volts ac/60 Hz, and if so, > is there a schematic available to do that ? > > Thanks > > Logan Please refer to the FAQ page of our website: www.doepfer.com > FAQ > A-100 > How can I modify the A-100 power supplies (both A-100NT12 and A-100PSU2) for another mains voltage (115V or 230V) (English, for experts only) Pay attention to the very important remark: "The following notes are intended for experts onyl. Carrying out of works described in these documents is allowed only for authorized personnel who are familiar with all valid safety rules" Best wishes Dieter Doepfer _________________________________________________________________ Hotmail: Free, trusted and rich email service. http://clk.atdmt.com/GBL/go/171222984/direct/01/ [Non-text portions of this message have been removed]
Message
RE: AW: [Doepfer_a100] Technical questions about the A-100PSU2 Power Supply
2009-09-17 by Logan Mitchell Sr
Attachments
- No local attachments were found for this message.