Doepfer

It's strange because in theory the voltage should not drop since these are
parallel circuits-- only the current should change.

On Sun, Nov 15, 2009 at 2:16 PM, Computer Controlled <acidted@gmail.com>wrote:

>
>
> I've noticed recently that the A-180 Multiple really cuts the voltage
> signal down quite substantially. I just got an MFB Dual ADSR and noticed
> that when i mult the Gate Output of my SH-101 by 3x, it drops the gate
> voltage down to where the MFB won't trigger anymore. Basically, i had it
> set up where the gate out went into the A-180, then the first 2 outs
> went to the two Gate Ins on the MFB and the 3rd out went to my A-140 EG.
> If i pulled the cable out that went to the A-140, the MFB would fire,
> but not with it inserted. However, it works if i use my 303, which has a
> hotter Gate signal. I checked the gate out voltages coming of the 101
> direct, then at each output of the A-180. I got the following:
>
> Direct Out from 101: 11.56v
> Into the A-180 w/no other cables inserted: same as above
> with 2 cables inserted: 7v
> with 3 cables inserted: 5.5v
>
> This is quite a bit of voltage drop if you ask me. Is there anyway to
> mod the A-180 so it doesn't eat up all my voltages?
>
> -Larry
>  
>


[Non-text portions of this message have been removed]