Doepfer

good.


Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
www. parallel - worlds - music. com
www. myspace. com/ parallelworldsmusic
www. myspace. com/ interconnectedmusic
www. myspace. com/ memorygeist
www. DiN. org. uk
www. musicamaximamagnetica. com
www. vu-us. com
www. shimarecords. co. uk


--- On Mon, 2/8/10, Greg Cerveny <greg.cerveny@gmail.com> wrote:

> From: Greg Cerveny <greg.cerveny@gmail.com>
> Subject: Re: [Doepfer_a100] too many volts on the a132-3?
> To: Doepfer_a100@yahoogroups.com
> Date: Monday, February 8, 2010, 9:01 PM
> The orb defaults to a 12v trigger. I
> need see if I can adjust it.
> 
> Oy... I'm an idiot.  When trying out other envelopes,
> I realized that it was
> the cv attenuator that was the problem.  I gave it 100
> rotates and now it's
> working.
> 
> On Mon, Feb 8, 2010 at 10:55 AM, Bakis Sirros <synth_freak_2000@yahoo.com>wrote:
> 
> >
> >
> > or, maybe, you sent too many volts into the trigger
> input of the 142... and
> > the decay envelope has a problem now...?
> >
> > does the top vca of the 132-3 work fine with other cv
> sources, apart from
> > the 142?
> >
> > the 132-3 vca's accept up to +/- 8 volts without
> distortion, in the audio
> > input, that does not mean that if the audio signal is
> higher the vca's will
> > be destroyed....
> >
> > btw, why would you have your ORB send a +12 volts
> gate, anyway?
> > are you triggering Roland envelopes from it, as well?
> >
> > Bakis Sirros - Parallel Worlds / Interconnected /
> Memory Geist
> >
> > [Doepfer_a100] group owner
> >
> > www. parallel - worlds - music. com
> >
> > www. myspace. com/ parallelworldsmusic
> >
> > www. myspace. com/ interconnectedmusic
> >
> > www. myspace. com/ memorygeist
> >
> > www. DiN. org. uk
> >
> > www. musicamaximamagnetica. com
> >
> > www. vu-us. com
> >
> > www. shimarecords. co. uk
> >
> > --- On Mon, 2/8/10, Greg Cerveny <greg.cerveny@gmail.com<greg.cerveny%40gmail.com>>
> > wrote:
> >
> > From: Greg Cerveny <greg.cerveny@gmail.com
> <greg.cerveny%40gmail.com>>
> > Subject: [Doepfer_a100] too many volts on the a132-3?
> > To: "doepfer_a100" <Doepfer_a100@yahoogroups.com<Doepfer_a100%40yahoogroups.com>
> > >
> > Date: Monday, February 8, 2010, 7:38 PM
> >
> >
> >
> >
> > Hello all,
> >
> > I had my orb sequencer gating @ + 12v into an a142
> into an a132-3.
> >
> > Now the top vca is not responding consistently to cv
> signals. The
> >
> > gain works fine. The bottom vca works fine. I see the
> 132-2 accepts
> >
> > -8 to +8. Did I put too much voltage into it?
> >
> > [Non-text portions of this message have been removed]
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
>     Doepfer_a100-fullfeatured@yahoogroups.com
> 
> 
>