Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: [Doepfer_a100] Re: A-183-3 Amplifier vs. A-119 External Input

2010-02-12 by Joachim

> I read on Muffs that you can upgrade the A119 by changing the chip, 
> but results seem to vary.

AFAIK the A-119 uses a TL062 which is optimized for low power 
consumption.
There are different alternatives with different specs therefore it no 
surprise that results vary. ;)
E.g. you can use a cheap TL072 which sounds slightly better.

But: If you want a real good sound you may also try a good external 
preamp.

I myself just changed swapped the TL062 for a TL072 and am ok with it 
as I process the
signal anyway and rather drastically. But I also never heard any 
'dullness' and my A-119
distorts only when I want it to.

Can anyone make audio files were they 'dullness' or distortion of a 
A-119 can be heard in comparison
with the original signal?
The 'dullness' in an A/B comparison may be the result of one of the 
signals being quieter.

Joachim

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.