Doepfer

maybe you could use a separate inverter module?

On 13 Feb 2010, at 12:03, phono 1337 wrote:

> seems this runs in reverse, when the midi clock is stopped the synced
> machine starts and vice versa, this is obviously due to the reset jack
> polarity, is it possible to change the reset polarity via the front
> panel or midi cc? I had a look around the manual and it doesn't seem
> to mention it. Anyone have any tips?
>
> Paul
>
> On Fri, Feb 12, 2010 at 11:56 PM, phono 1337 <phono1337@gmail.com>  
> wrote:
> > im out of sync sockets and i've already put plenty of splitters  
> on the
> > sync outs (msy2/mc202) so im wondering about using the A-190 clock
> > outs as a din sync.
> >
> > Something like
> >
> > a190 clock out to pin 3 on the din connector
> > a190 reset to pin 1 on the din connector
> > a190 ground to pin 2 on the din connector
> >
> > if i set the reset polarity and clock divisor correct im confident
> > this will work, has anyone ever tried this?
> >
> > Paul
> >
> 



[Non-text portions of this message have been removed]