Doepfer

If you'd opt for a three-position switch, then you could easily label the divisions next to the output jacks in three columns, like so:

2/3/3
3/5/5
4/6/7
etc...

...or similar.

Or, you could include some logical OR and AND gates, and let the user do any division themself. :-)

_g


--- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote:
>
> > I'll definitely take one with all odds, but what would be really
> > good is a divider which just does prime numbers. A160-3, or is it just me?
> >
> > Cheers, Nick
> 
> We could develop a version with different sets of dividing factors, e.g.
> linear 2/3/4/5/6..., 3/5/6/7/9/10 (only the factors not available at A-160),
> 3/5/7/9/11... (only odd factors), 3/5/7/11/13... (only prime numbers) and so
> on. The set could be chosen e.g. by internal jumpers or a three-position
> toggle switch. This option would increase only a little bit. But the main
> problem is the front panel printing. It's not possible to built a separate
> front panel for each version (the front panel will be probably the most
> expensive part of the module). The only idea is a blank panel and we add
> self-adhesive stickers for all versions. But such a panel would look a bit
> poor (like the prototypes).
> 
> Just an idea ...
> 
> Dieter Doepfer
>