Does your MT9 output 9 gates (i.e. the output remains high until the corresponding note off message is transmitted) or only short trigger signals ? If gate signals are available the A-150 should do the job. Otherwise A-151 can be used (in this case the state changes with each trigger pulse). Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Simon > Gesendet: Dienstag, 20. April 2010 10:48 > An: Doepfer_a100@yahoogroups.com > Betreff: [Doepfer_a100] Re: Can I trigger the CV on the Doepfer A-150 ? > > > I use the A-150 as a gate; audio/CV signal IN1, nothing in IN2, > audio out I/O. > > I know that the A-151 is capable of this - I have one myself - > but since the A-150 is made of two identical modules, this would > save me a lot of rack space. > The thing is that I would need six A-150 instead of twelve A-150! > > The MT9 midi-trig from Analogue Solutions can switch between nine > trigger signals and what is very important, I can make Max/Msp > switch between the nine triggers in any order I like. > So with two MT9 and six A-150 it would be possible to have plenty > of "gates" incorporated in my modular system and only use 44 HP > of rack space. > Isn't this the best solution, if the A-150 can be triggered, for > my system? > > Best wishes > Simon > > > --- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote: > > > > > I have tested the Doepfer A- 152, but it doesn't seem to suit > my needs. > > > Is it possible to change the CV inputs of the A-150 to a > trigger input? > > > Or maybe it's too expensive? > > > Thanks > > > Simon > > > > From what you asked for several A-152 should be right solution. > > > > Anyway: What should the A-150 trigger input do: > > > > a) toggle between the two inputs ? > > b) switch to input #2 as long the trigger signal is high ? > > > > Version a) is already available with the A-150. If you want to toggle > > between 2 inputs the A-151 could be used (limited to 2 steps by > means of the > > switch). > > > > Best wishes > > Dieter Doepfer > > > > > > > ------------------------------------ > > Yahoo! Groups Links > > >
Message
AW: [Doepfer_a100] Re: Can I trigger the CV on the Doepfer A-150 ?
2010-04-20 by yahoo@doepfer.de
Attachments
- No local attachments were found for this message.