Doepfer

I've got both Analogue Systems, Analog Solutions, Doepfer, 
Blacet, Buchla (albiet modified), MOTM, Oakley and homebrew 
all happily singing together.  I even went ahead and made 
faceplates for the Blacet stuff so it was 3RU high.  To see it, go 
to:

http://www.allegrobikes.com/synth.html

Once there, click on 'Son of Frankensynth' and then click the links 
for the Blacet modules - you can see a close ups.

However:  I am running the Blacet, Oakley, Buchla and MOTM off 
a separate 15 volt bipolar supply

In as far as voltage inverters (which I am quite fond of), I have 
some I made and two wonderful Blacet mixer/processors which 
work really really well.  Also, Tony Allgood at Oakley Sound 
makes a companion module for the MOTM 410 that can me 
adapted for bipolar processing of input signals - I got one of 
those, too!

You CAN'T have too many voltage inverters or mixers.  Doepfer 
makes one as well (part of their vocorder system   - forgot the 
number, (sorry)) and while I've never used it, it seems very 
functional as well.  I believe they also make a single voltage 
inverter module as well w/o any attenuation, which I really prefer 
having because at that point you can process as well.

hope this helps,

P




--- In Doepfer_a100@y..., "jmaddocks1975" 
<jmaddocks1975@y...> wrote:
> Analogue Systems, Analogue Solutions, Blacet etc modules 
are all 
> compatible in terms of interfacing with each other.
> However, if you want to put them in the same case you will 
need  
> something to convert the power connectors.
> I have Analogue Solutions modules in my doepfer case which 
only 
> required a different ribbon cable, easy. I have Doepfer modules 
in 
> my Analogue Systems case which required an additional 
circiut board 
> to convert plugs. 
> 
> 
> 
> --- In Doepfer_a100@y..., "mdimmm@h..." <mdimmm@h...> 
wrote:
> > Many thanks for the suggestions for 16-way cables etc. I've 
now 
> got my A-174
> > sitting on the desk in front of my system, connected with 
three 
> feet of
> > cable to the busboard. The vertical position of the joystick 
> greatly
> > enhances the control of it, IMO. I haven't actually gotten 
around 
> to doing
> > the same with an A-175, might get too messy.
> > 
> > Out of curiosity, which of the currently available modules from 
> other
> > manufacturers are fully compatible with the A-100? (In terms 
of 
> module size,
> > power requirements, signal strength, etc.) I'd be curious to 
see 
> if there's
> > anything out there that would add to the Doepfer selection...
> > 
> > Thanks
> > m. dimm