I've got both Analogue Systems, Analog Solutions, Doepfer,
Blacet, Buchla (albiet modified), MOTM, Oakley and homebrew
all happily singing together. I even went ahead and made
faceplates for the Blacet stuff so it was 3RU high. To see it, go
to:
http://www.allegrobikes.com/synth.html
Once there, click on 'Son of Frankensynth' and then click the links
for the Blacet modules - you can see a close ups.
However: I am running the Blacet, Oakley, Buchla and MOTM off
a separate 15 volt bipolar supply
In as far as voltage inverters (which I am quite fond of), I have
some I made and two wonderful Blacet mixer/processors which
work really really well. Also, Tony Allgood at Oakley Sound
makes a companion module for the MOTM 410 that can me
adapted for bipolar processing of input signals - I got one of
those, too!
You CAN'T have too many voltage inverters or mixers. Doepfer
makes one as well (part of their vocorder system - forgot the
number, (sorry)) and while I've never used it, it seems very
functional as well. I believe they also make a single voltage
inverter module as well w/o any attenuation, which I really prefer
having because at that point you can process as well.
hope this helps,
P
--- In Doepfer_a100@y..., "jmaddocks1975"
<jmaddocks1975@y...> wrote:
> Analogue Systems, Analogue Solutions, Blacet etc modules
are all
> compatible in terms of interfacing with each other.
> However, if you want to put them in the same case you will
need
> something to convert the power connectors.
> I have Analogue Solutions modules in my doepfer case which
only
> required a different ribbon cable, easy. I have Doepfer modules
in
> my Analogue Systems case which required an additional
circiut board
> to convert plugs.
>
>
>
> --- In Doepfer_a100@y..., "mdimmm@h..." <mdimmm@h...>
wrote:
> > Many thanks for the suggestions for 16-way cables etc. I've
now
> got my A-174
> > sitting on the desk in front of my system, connected with
three
> feet of
> > cable to the busboard. The vertical position of the joystick
> greatly
> > enhances the control of it, IMO. I haven't actually gotten
around
> to doing
> > the same with an A-175, might get too messy.
> >
> > Out of curiosity, which of the currently available modules from
> other
> > manufacturers are fully compatible with the A-100? (In terms
of
> module size,
> > power requirements, signal strength, etc.) I'd be curious to
see
Show quoted textHide quoted text
> if there's
> > anything out there that would add to the Doepfer selection...
> >
> > Thanks
> > m. dimm