Totally impressive work Guy! Looks really neat! And so in style ;-) And wait did Dieter say SLOPE GENERATORS? and also in module form??!?! Totally into that. Recently worked with the Serge slope generators and I loved it. Ernst On Wed, Jun 30, 2010 at 4:32 PM, <yahoo@doepfer.de> wrote: > > > Again: my comments are written inline. > > Dieter > > > > That was the plan, yes. > > The VCA Am inputs will be easy. For the Lin FM I'd probably have to try a > bit harder. > > The serial resistor for the linear FM input is 100k (R11 leading from the > VCO lin FM input to the summing node for the linear FM). If you add e.g. > another 100k resistor the sensitivity is half as much as before. > > > > > > not very happy with the way the Slew Limiter works. > > > I'm surprised to hear that. The slew limiter works like all slew > limiters, > > > nothing but a capacitor buffered by an operational amplifier that is > charged > > > via a variable resistor (potentiometer with logarithmic scale in the > range > > > 1M...5M recommended). It's exactly the same curcuit as for the upper > unit of > > > the A-170. > > > > I used a 1M Audio. Might try a higher value... > > You may even increase the value of the slew capacitor which is only 220nF > (C21 on the top right edge of the pcb). You may solder e.g. a electrolytic > capacitor (1u...10u) in parallel to C21 to increase the max. slew time. The > right pin of C21 is GND (i.e. the minus pole for an electrolytic capacitor) > > > > All the classics then... :-) > > I'd prefer more wave-shaping/multiplying over an additional > > oh-no-not-again! LP filter. > > And extended VCLFO, preferably with PW/M, would be very cool, yes. > > Some easy little stuff like Boolean logic, comparators & Schmitt > > Triggers would be welcome too. > > Or replace 70% of all of the above with one VC Slope generator :-) > > Yes, we are working on a VC slope generator too (even as an A-100 module). > Maybe we could add it to the expansion board. > > > [Non-text portions of this message have been removed]
Message
Re: AW: [Doepfer_a100] DIY Doepfer Synth | first panel
2010-06-30 by achtung_999
Attachments
- No local attachments were found for this message.