Doepfer

Sounds like an interruption between the BBD output and the corresponding
socket on the front panel. The internal signal path is as follows:

internal BBD output (which is obviously working) -> BBD output socket ->
Feedback socket (via switching contact of the output socket)

The first connection (internal BBD out -> socket) is made via one of the two
5 pin connectors. Maybe one of the cables is loose or there is any other
interruption.

If you cannot find the fault please send the module for service/repair to
the dealer/representative where you purchased the module.

Best wishes
Dieter Doepfer


> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von brian
> Gesendet: Donnerstag, 22. Juli 2010 05:55
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] 188-1 256 stage - no ouput from bbd out or
> feedback
>
>
> Hello,
>
> I recently got an A-188-1 256 stage unit and have come across an
> issue with the direct bbd out and feedback path.  First off I get
> no output at all from the bbd out which means no feedback at all. 
>  I tried injecting another signal into the feedbak input but even
> this does not produce any difference.  I am fairly handy with a
> soldering iron so I was wondering if anyne could shed some light
> on what could be going on.  Everything else on the unit works
> fine including the mixed output including the polarity switch for
> the mixed out.
> Ideas?
>
> thanks,
> b.
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>