Doepfer

you can achieve this behavior by combining multiple doepfer modules.  invert
the clock output that you want to use, then using VCAs and mults of signals
like run/stop and a start pulse you can get the behavior you are looking
for.  others may be able to chime in with specific patches.  I haven't had
run/stop or a start pulse available yet to mess around with this stuff.
 DIN-sync has some of these signals which I may tap into to get more
functionality in this area, if I cannot hold out for the STG stuff to come
out slowly but surely.  I think the 4ms RCD does this out of the box as
well.

On Mon, Nov 22, 2010 at 10:09 PM, mbox_online <mbox@online.no> wrote:

>
>
> Is it possible to modify the A-160 clock divider so that it starts with
> firing all the gates and goes from there? That it counts from the top
> instead of from the bottom. Now I have to wait say 32 clocks for it to fire
> the /32 gate for the first time. It would be easier to run multiple clocked
> devices in sync if they all started on the downbeat.
>
> Martin
>
>  
>


[Non-text portions of this message have been removed]