Doepfer

Hi Sidney,

 

Unfortunately I am not directly familiar with the A-190-2. In the manual
there is a diagram of the circuit board where a trim pot for the CV scale is
indicated. Trimming this might solve your tuning issue. As for the missing
gate I am at a loss tbh. It's quite possible that your unit is faulty. Did
you buy it from a dealer? I would contact the seller or Doepfer directly:
software(at)doepfer.de

 

Hope you get your module fixed.

 

York 

 

  _____  

Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Im
Auftrag von Sidney
Gesendet: Freitag, 4. Februar 2011 16:33
An: Doepfer_a100@yahoogroups.com
Betreff: [Doepfer_a100] Re: Can't trigger A-140 from A-190-2

 

  

Hello York. I am connecting my midi keyboard with a standard midi cable to
the midi input from A190-2 interface.

I also notice that the VCO doesn't make a tonal scale sound as I press notes
from the keyboard. For example, if I press a C3 then a C4 on the keyboard I
hear another interval instead of an octave. I kept the system turned on for
more than 20 minutes as I read it needs some time to make it get in tune.

Sidney

--- In Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100%40yahoogroups.com>
, "York Luethje" <ybl@...> wrote:
>
> Hi Sydney, how are you adressing the Midi interface?
> 
> 
>
> _____ 
> 
> Von: Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100%40yahoogroups.com>
[mailto:Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100%40yahoogroups.com>
] Im
> Auftrag von Sidney
> Gesendet: Freitag, 4. Februar 2011 12:36
> An: doepfer_a100@yahoogroups.com <mailto:doepfer_a100%40yahoogroups.com> 
> Betreff: [Doepfer_a100] Can't trigger A-140 from A-190-2
> 
> 
> 
> 
> 
> Hello everybody. I'm a totally newbie and just assembled my 
> A-100 mini system this week. It has a A-190-2, A-110, A-106-1, A-145,
> A-132-3 and A-140 assembled on a Tiptop Happy ending kit.
> 
> I tried to send a gate output from the A-190-2 midi interface to the A-140
> ADSR gate input but nothing happened. I connected the A-145 LFO to the
A-140
> and then it's 'ADSR Contr.' light turned on. The 'ADSR Contr.' light also
> turned on when it received signal from the waveforms output from the VCO.
Is
> there another way to trigger the A-140? Maybe the 190-2 gate output is
> faulty?
> 
> I followed the "Simple synthesizer standard patch with one envelope
> generator" diagram from page 11 of A-190-2 (since it is a very similar
> system as mine except for the different filter module) but could not get a
> sound from it. 
> 
> I just removed the two jumpers from A-190-2 and the junper from A-140 but
> nothing changed. 
> 
> Thank you,
> 
> Sidney H.
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]