Doepfer

the problem is analogue systems have drilled their holes on the 
modules in a slight different position to doepfer, so you get a gap 
between doepfer and analogue systems modules.

You can buy the rails from Analogue Solutions (don't know what they 
charge), they have a downloadable file about building cases for 
modular systems.

John




--- In Doepfer_a100@y..., "buechlerjoe" <buechlerjoe@t...> wrote:
> I only have A100 modules, but I was under the impression that the 
> sliding inner rails in the Doepfer mounting rails can easily be 
> adjusted to accomodate the mounting holes in non-Doepfer modules 
> (assuming the entire row is RS Integrator or Concussor modules).
> 
> It this correct?
> 
> Joe
> 
> --- In Doepfer_a100@y..., "Paul Schulz" <dasfonk@w...> wrote:
> > Hey Flamey/ Zameer,
> > 
> > the incompatibilities between Doe. and ASys is not about the 
> mounting rails, but the rails you screw your modules into the 
frame. 
> They are not part of the mounting rails and have to be bought 
> separately, by the way. For combining ASys and Doepfer you can cut 
> them into parts, or go the cheaper way: Use nuts which fit the 
module 
> screws and can be put into the mounting rail. 
> > 
> > I´m sorry, but I can´t give any information about the number/ 
name 
> of the mounting rails. I checked Conrad´s website (www.conrad.com) 
> today, but their search engine is crap. But (once again... I know, 
> guys), check your favorite store for electronic components. The 
better 
> ones offer those rails and other stuff you can make cases of (like 
> blank faceplates; rails; upper, bottom and side walls). 
> > 
> > Paul
> > 
> > 
> > ----- Original Message ----- 
> >   From: flamey101 
> >   Subject: [Doepfer_a100] Re: Metal blank panels
> > 
> >   ...do you maybe have a model name/number for the mounting 
rails 
> maybe? 
> >   So I can order that right away?
> > 
> >   Also, I currently have  both Doepfer (controls) and Analogue 
> Systems  
> >   (audio) modules. I've read there are some incopatibilities  
> between 
> >   both of the mounting rails (had something to do with the panel 
> size 
> >   or something?), but I can use the same mountingrails for them? 
> >   (let's  say 1 3U of the case all AS and all of the rest 
Doepfer).
> > 
> >   Greetings, Zameer..
> > 
> > 
> > 
> > [Non-text portions of this message have been removed]