Doepfer

a-ha, that explains what I've thought when looking at my modules, It 
doesn't look that obvious, though.
A downloadable file? On their website? I've checked a lot of PDF's 
out there nut I couldn't find much information...

--- In Doepfer_a100@y..., "jmaddocks1975" <jmaddocks1975@y...> wrote:
> the problem is analogue systems have drilled their holes on the 
> modules in a slight different position to doepfer, so you get a gap 
> between doepfer and analogue systems modules.
> 
> You can buy the rails from Analogue Solutions (don't know what they 
> charge), they have a downloadable file about building cases for 
> modular systems.
> 
> John
> 
> 
> 
> 
> --- In Doepfer_a100@y..., "buechlerjoe" <buechlerjoe@t...> wrote:
> > I only have A100 modules, but I was under the impression that the 
> > sliding inner rails in the Doepfer mounting rails can easily be 
> > adjusted to accomodate the mounting holes in non-Doepfer modules 
> > (assuming the entire row is RS Integrator or Concussor modules).
> > 
> > It this correct?
> > 
> > Joe
> > 
> > --- In Doepfer_a100@y..., "Paul Schulz" <dasfonk@w...> wrote:
> > > Hey Flamey/ Zameer,
> > > 
> > > the incompatibilities between Doe. and ASys is not about the 
> > mounting rails, but the rails you screw your modules into the 
> frame. 
> > They are not part of the mounting rails and have to be bought 
> > separately, by the way. For combining ASys and Doepfer you can 
cut 
> > them into parts, or go the cheaper way: Use nuts which fit the 
> module 
> > screws and can be put into the mounting rail. 
> > > 
> > > I´m sorry, but I can´t give any information about the number/ 
> name 
> > of the mounting rails. I checked Conrad´s website 
(www.conrad.com) 
> > today, but their search engine is crap. But (once again... I 
know, 
> > guys), check your favorite store for electronic components. The 
> better 
> > ones offer those rails and other stuff you can make cases of 
(like 
> > blank faceplates; rails; upper, bottom and side walls). 
> > > 
> > > Paul
> > > 
> > > 
> > > ----- Original Message ----- 
> > >   From: flamey101 
> > >   Subject: [Doepfer_a100] Re: Metal blank panels
> > > 
> > >   ...do you maybe have a model name/number for the mounting 
> rails 
> > maybe? 
> > >   So I can order that right away?
> > > 
> > >   Also, I currently have  both Doepfer (controls) and Analogue 
> > Systems  
> > >   (audio) modules. I've read there are some incopatibilities  
> > between 
> > >   both of the mounting rails (had something to do with the 
panel 
> > size 
> > >   or something?), but I can use the same mountingrails for 
them? 
> > >   (let's  say 1 3U of the case all AS and all of the rest 
> Doepfer).
> > > 
> > >   Greetings, Zameer..
> > > 
> > > 
> > > 
> > > [Non-text portions of this message have been removed]