Doepfer

> Hi all!  I want to buy A-176 voltage sources in order to  DC
> control some other modules, My question is ( excuse my lack of
> knowledge):
> Is it possible to change the" 0 to +5V"  values in the A-176   to
> "0 to +10V"  ?
> I read in the A-176 manual that there are some jumpers at the
> back in order to change the values from 0 to +5V   to  -2.5 to
> +2.5V  But the modules I want to control take up to 10v.
>
> Any other solution (or modules to buy) so I can get the +10v dc
> source that I need?
>
> Thanks all in advance
>
> ric

That's no problem. The three feedback resistors R4, R9 and R13 have to
changed from 47k to 91k. These are the only 47k resistors on the A-176
board.

Best wishes
Dieter Doepfer