Doepfer

try sending a gate at the accent input also of the sd88 (at the same time that you send the gate to the trigger input). 
then the SD88 might work with +5volts gates too.... or better add a cv offset of more than 5 volts to the accent input of the SD88... 

Bakis 

From: Zoë Blade <zoe@bytenoise.co.uk>
To: Doepfer_a100@yahoogroups.com
Sent: Saturday, September 17, 2011 1:19 PM
Subject: Re: [Doepfer_a100] +5V gate to +12V trigger?


  
> pass the +5 volts trigger via the A183-3 Amplifier module to raise it to +12 volts and then pass it via the A162 Dual trigger delay module, to shape the gate into a (short-length) trigger.
> 
> that said, the Analogue Solutions Drum modules trigger fine with +5 volts gates too...
> 
> but the resulting sound may be better with +12 volts triggers, indeed....

Thank you very much! I'll get an A-183-3, that looks like exactly what I'm after. I can get *some* modules (the BD88 and CP88) to trigger at +5V, but not the SD88, which has the trigger LED light up but no sound actually come out of it, and judging by an old thread on Muff Wigglers ( http://www.muffwiggler.com/forum/viewtopic.php?t=18258 ), it's just that Analogue Solutions snares need a bit more juice on the trigger for some reason.

Thanks again!
Zoe.


[Non-text portions of this message have been removed]