Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: Suggestions for what to do with 24HP (or maybe 32)

2002-09-25 by flamey101

To ask my all famous question again :)
Do you sell your A-191 if you do? 8-)


--- In Doepfer_a100@y..., unknown freak <ospengler@r...> wrote:
> This is a really idiosyncratic question.
> 
> That said, I use my A129/3 a LOT.
> 
> > -----Original Message-----
> > From: Joe Buechler [mailto:buechlerjoe@t...] 
> > Sent: Wednesday, September 25, 2002 10:56 AM
> > To: Doepfer_a100@y...
> > Subject: [Doepfer_a100] Suggestions for what to do with 24HP 
> > (or maybe 32)
> > 
> > 
> > If I replace my A190/A191 with an MCV24, I'll have 24HP of space 
> > suddenly available. I could maybe extend that to 32HP if I lose 
the 
> > A115 audio divider, which I don't use very often.
> > 
> > Anyone have any good suggestions on how I might use this space?
> > 
> > I'm considering the VC mixer (maybe with the morphing controller).
> > 
> > Another possibility is the A129/3 attenuator/offset module which 
> > might be really useful. I generally use a mixer and CV source for 
> > attenuation and offset, which would be free'd up.
> > 
> > Maybe just an assortment of miscellaneous 8HP modules - I'm 
somewhat 
> > interested in the freq shifter, the logic module, maybe the 
analog 
> > version of the ribbon controller module instead of getting the 
midi 
> > version.
> > 
> > Comments? Suggestions?
> > 
> > Joe
> > 
> > 
> > 
> > 
> > ------------------------ Yahoo! Groups Sponsor 
> > ---------------------~--> Sell a Home with Ease! 
> > http://us.click.yahoo.com/SrPZMC/kTmEAA/MVfIAA> /QnLolB/TM
> > 
> > 
> > --------------------------------------------------------------
> > -------~->
> > 
> > To unsubscribe from this group, send an email to: 
> > doepfer_a100-unsubscribe@y...
> > 
> >  
> > 
> > Your use of Yahoo! Groups is subject to 
> > http://docs.yahoo.com/info/terms/ 
> > 
> > 
> >

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.