Doepfer

Thanks Peter. Ya, that's what I was planning to do, put the A129/3 
next to one of my A138a mixers.

I have a question about the A163 VC Divider, one of the other modules 
I'm considering. The User's Guide says that to obtain a DC coupled 
output, the module can be modified by adding a jumper to short out the 
cap C7. I'd like to use the A163 as a VC clock divider. What would I 
be giving up if I jumper the capacitor?

Joe

--- In Doepfer_a100@y..., "(i think you can figure that out)" 
<petergrenader@h...> wrote:
> The A129/3 IS AN EXTEMELY USEFUL MODULE!!!!!
> 
> It allows for full processing of control voltages.  What I suggest 
you 
> do however is (if you have one, if not this also recommended for the 
> A129/3) is place a A138a cv mixer next to it, so you can easily mix 
the 
> prcoessed CVs as well.
> 
> I don't own an A129/3.  I ave built two processors that do the same 
> thing -and- i own two Blacet mixer/processors that to this plus 
mixing 
> and I use them continually.
> 
> Peter
> 
> 
> 
> 
> --- In Doepfer_a100@y..., unknown freak <ospengler@r...> wrote:
> > This is a really idiosyncratic question.
> > 
> > That said, I use my A129/3 a LOT.
> > 
> > > -----Original Message-----
> > > From: Joe Buechler [mailto:buechlerjoe@t...] 
> > > Sent: Wednesday, September 25, 2002 10:56 AM
> > > To: Doepfer_a100@y...
> > > Subject: [Doepfer_a100] Suggestions for what to do with 24HP 
> > > (or maybe 32)
> > > 
> > > 
> > > If I replace my A190/A191 with an MCV24, I'll have 24HP of space 
> > > suddenly available. I could maybe extend that to 32HP if I lose 
the 
> > > A115 audio divider, which I don't use very often.
> > > 
> > > Anyone have any good suggestions on how I might use this space?
> > > 
> > > I'm considering the VC mixer (maybe with the morphing 
controller).
> > > 
> > > Another possibility is the A129/3 attenuator/offset module which 
> > > might be really useful. I generally use a mixer and CV source 
for 
> > > attenuation and offset, which would be free'd up.
> > > 
> > > Maybe just an assortment of miscellaneous 8HP modules - I'm 
somewhat 
> > > interested in the freq shifter, the logic module, maybe the 
analog 
> > > version of the ribbon controller module instead of getting the 
midi 
> > > version.
> > > 
> > > Comments? Suggestions?
> > > 
> > > Joe
> > > 
> > > 
> > > 
> > > 
> > > ------------------------ Yahoo! Groups Sponsor 
> > > ---------------------~--> Sell a Home with Ease! 
> > > http://us.click.yahoo.com/SrPZMC/kTmEAA/MVfIAA> /QnLolB/TM
> > > 
> > > 
> > > --------------------------------------------------------------
> > > -------~->
> > > 
> > > To unsubscribe from this group, send an email to: 
> > > doepfer_a100-unsubscribe@y...
> > > 
> > >  
> > > 
> > > Your use of Yahoo! Groups is subject to 
> > > http://docs.yahoo.com/info/terms/ 
> > > 
> > > 
> > >