Doepfer

Hello Tony,

yes, my external line mixer (a behringer eurorack pro) get a mono signal (Left/Mono In used) and split it on my Left and Right monitor (of course there is no real stereo fx in this case, the same signal is brought to L and R).

this works both in case a multiple is used in patch and in case no multiple is used in the patch. but i always pass through a VCA (intellijel uVCA or Doepfer A-131 exp VCA) as last module before the mixer.

Marco

--- In Doepfer_a100@yahoogroups.com, "Ton Akveld" <aca@...> wrote:
>
> Hi Marco,
> 
> Thanks for thinking with me ;-)
> 
> You write: 
> > i have my external mixer bringing the mono-signal to L and R speaker.
> Does it still after routing through a multiples?
> 
> Love to hear!
> 
> Ton
> 
> 
> --- In Doepfer_a100@yahoogroups.com, "marco_zambardi" <marco.zambardi@> wrote:
> >
> > strange...
> > usually modules use mono jack in and patching them with a stereo cable have no effect since there should be no connection (except for modules with a switch in the jack in to break normalled connection).
> > 
> > i have my external mixer bringing the mono-signal to L and R speaker.
> > 
> > i will have a try.
> > 
> > --- In Doepfer_a100@yahoogroups.com, "Ton Akveld" <aca@> wrote:
> > >
> > > Dear group,
> > > 
> > > Just like Bakis I want to wish you all a good 2012!
> > > 
> > > But now, something completely different.
> > > 
> > > When plugging in headphones in an audio out connector (VCA, mixer) I hear both the left and right channel.
> > > However, if I route the audio out through a multiples, the audio signal is halved, only the left channel is left.
> > > Is this caused by a difference in the audio out and multiples connectors?
> > > Hope someone can tell.
> > > 
> > > Warm regards,
> > > 
> > > Ton
> > >
> >
>