Doepfer

This normal. You should see it this way: the gain knob controls the
'opening' of the VCA together with the control voltage at the cv input.
In your case this is an envelope which is most commonly a positive voltage,
so putting the gain at 0 is a good setting.


Try putting the gain knob at 12 hrs and plug in an LFO using the sine
output or triangle output.

Greetings,


Ernst



Op 16 dec. 2012 12:09 schreef "isoldeandisobelle" <isoldeisobelle@gmail.com>
het volgende:

> **
>
>
> Hi,
>
> I am fairly new to the world of Modular's, so I may be getting something
> wrong here - I am running the output of a A-110 through the A-107 which is
> going in to the A-132-3 (set to exp) which is being controlled by A-143-2
> and the out put to A-138 mixer.
>
> If the gain knob on the A-132-3 is set to anything other than zero, the
> sound of the oscillator is coming through without the envelope being
> activated, in fact even set at zero, there is still a tiny amount of sound
> but I have to turn the volume up to be able to hear this.
>
> With the gain set at zero and the CV knob set to a desired position - all
> is well when the envelope is activated.....is this correct, or am I
> patching something wrongly.
>
> Kind regards
>
>  
>


[Non-text portions of this message have been removed]