Doepfer

Karel,

I'll send a copy of this email to Christian Assall (software@doepfer.de). He
programmed the new firmware and knows details. Please address questions that
relate to the Dark Time firmware directly to him.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von karelvanbezooijen
> Gesendet: Montag, 31. Dezember 2012 12:23
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Dark Time additional Combi Modes
>
>
> Hello,
>
> I installed firmware version v1.2 today and noticed this when
> using the additional Combi Modes:
>
> When using Mode 1 (which is the 'standard mode' i.e. lower row is
> gate length) row 1 is dependent to row 2. I mean step 9 always
> controlling step 1 and so on.
>
> This is different is Mode 2 (lower row is velocity)
>
> Example:
>
> Row 1 = step 1 to 8
> Row 2 = step 9
>
> In Mode 2 I can control the entire Row 1 with just the knob of
> step 9 which is great. (esp. when velocity is controlling Cutoff)
>
> In Mode 1 this is not possible (any more).
> In this example step 9 is controlling the gate length of step 1 only.
>
> I don't know if this has been programmed this way deliberately of
> course but personally I would like that Mode 1 is acting the same
> way as Mode 2.
> Modes 4 (volume) and 6 (pitch) work the same as Mode 2 BTW.
>
>
> Regards Karel
>
> (BTW Dieter, I send you an email concerning the COTK ratchet
> sequencer some time ago. I found out that the setup can even be
> more simple as I thought. I use an A-138a mixer to mix the gates
> now which works great)
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>