Doepfer

Did you (re-)install a jumper to the pin header JP4 on the interface/supply
board instead of the glide option ?

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Robert Crouch
> Gesendet: Freitag, 1. Februar 2013 19:03
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Re: Dark Energy not responding to midi
>
>
> Turns out it's not the glide option after all.
>
> I think I need to send it in for repair.
>
> :-(
>
>
>
> --- In Doepfer_a100@yahoogroups.com, "Robert Crouch"  wrote:
> >
> > I installed the glide kit to my Dark Energy a while ago and
> lately the internal midi-cv converter has been giving me
> problems. Every so often it just stops responding to any incoming
> midi signal, either through the USB or midi ports. I reinstalled
> the glide control and that seems to clear it up, and every so
> often I would have to remove and reinstall the thing to get the
> unit to respond to midi.
> >
> > Today it stopped responding at all, so to troubleshoot it I
> decided to remove the glide knob to see if maybe it's faulty. In
> order to install the glide I had to remove in internal jumper,
> and now I can't find it where I stored it. Does anyone know off
> hand what kind of jumper I need to buy?
> >
> > Also if this is not a case of a bad glide knob, is there any
> place in the US that can repair the unit or will it need to be
> sent back to Doepfer?
> >
> > Thanks in advance for the advice!
> >
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>