Doepfer

Thanks Florian! I unhooked my whole studio and then hooked it all back up and now at least the mopho works correctly. I have not checked the p600 yet but I'm sure it will be fine as well.

Thanks, Jack

On May 21, 2013, at 1:36 AM, Florian Anwander <fanwander@mnet-online.de> wrote:

> Am 19.05.2013 12:54, schrieb Jack:
> > Hello group I was just wondering if it's a Dave Smith/sequential
> > circuits thing or if it's an analog synth problem. ever since I
> > updated my Darktime too the latest firmware it hangs notes on both my
> > DSI Mopho and my SCI Prophet600 but not on my Korg ms2000. I have
> > tried all the different firmwares there are, but none of them fix the
> > problem. Maybe someone else has experienced this as well, I hope
> > there is a fix for this please let me know. Thanks in advance
> 
> First of all: are you sure that you don't have a midi-loop in the chain 
> with the darktime? The P600 is known to have a flimsy midi 
> implementation, but I would be astonished to see MIDI problems withe the 
> Mopho. Only a buffer overrun might cause something like that, and a loop 
> could cause a buffer overrun.
> 
> Tests:
> * Does it appear also if the Mopho is connected only via DT-MIDI-out -> 
> Mopho-MIDI-in an nothing else (nothing attached to Mopho MIDI out; 
> Nothing attached to MIDI-In at the Darktime)?
> * Same test with the P600
> 
> If it appears in this test configuration too, then the next step is:
> * check the outputstream of the Darktime with a MIDI-monitor. Any 
> additional Data but the note information?
> 
> Florian
> 


[Non-text portions of this message have been removed]